Agrifence tape corner screw insulator in polyamide with galvanised 8mm support for tape up to 40mm

Agrifence Tape Corner Screw Insulator – Pack of 2

$6.14
Sale price  $6.14 Regular price  $10.07
Skip to product information
Agrifence tape corner screw insulator in polyamide with galvanised 8mm support for tape up to 40mm

Agrifence Tape Corner Screw Insulator – Pack of 2

$6.14
Sale price  $6.14 Regular price  $10.07
Agrifence Tape Corner Screw Insulator

Corners take the load. A straight-run insulator holds tape against a post; a corner insulator has the full tension of two fence runs pulling against it at an angle, and this one is built accordingly — polyamide plastic over a galvanised continuous 8mm support that Agrifence describe as giving 100% stability. It takes tape up to 40mm wide.

The surface the tape passes over is smooth and rounded, which matters more than it sounds. Tape dragged around a sharp edge frays where it turns, and a frayed corner is where a fence fails in the first gale. This lets the tape feed round safely and keeps it flat.

<>
Performance & Benefits
  • Screw-in corner insulator for electric fence tape up to 40mm wide.
  • Galvanised continuous 8mm support for full stability under load.
  • Polyamide plastic body, chosen by Agrifence for high tensile forces.
  • Smooth, rounded surface lets tape feed through without chafing.
  • Extra strong and durable, for the highest-tension points on a fence.
<>
Suitable For
  • Corners and direction changes on permanent tape fencing.
  • Tape up to 40mm wide, including standard horse tape.
  • Sound timber posts that will hold a screw fixing under tension.
  • Replacing line insulators that have been misused at a corner and cracked.
  • Not for rope or polywire — the Agrifence Super Egg Insulator or Woodscrew Corner/End Insulator are the corner fittings for those.
<>
How to Use
  • Switch the energiser off before working on the line.
  • Screw the insulator into sound timber at the corner post, square to the direction of pull.
  • Feed the tape through the rounded channel so it lies flat and does not twist.
  • Bring the line up to tension and check the tape is bearing on the insulator, not on the post edge.
  • Inspect where the tape passes through once a season — corner fittings wear first.
<>
Specification
  • Agrifence product code H7020. Barcode 5052150002866.
  • Polyamide plastic body on a galvanised continuous 8mm support.
  • Suits electric fence tape up to 40mm wide.
  • Screw-in fixing for timber posts.
  • Agrifence publish no breaking load or overall length figure, so neither is stated here.
  • Agrifence list H7020 as a single insulator and publish no multipack, so the pack quantity in the title above is the store's own.

You may also like